Visit Our Main site
OSHA 30 Hour General Industry Training With Study guide
OSHA 30 Hour General Industry Training with Study Guide
 |
The Regular price for this course is $339, however if you use the discount code “OSHA” upon checkout, the price is only $271.20 receive a 20 percent discount |  |
 The OSHA 30 Hour General Industry Outreach Training course is a comprehensive safety program designed for anyone involved in general industry. Specifically devised for safety directors, foremen, and field supervisors.
The program provides complete information on OSHA compliance issues. OSHA recommends Outreach Training Programs as an orientation to occupational safety and health for workers covered by OSHA 29 CFR 1910. General industry workers must receive additional training, when required by OSHA standards, on specific hazards of the job. |
 |
|
NEW! OSHA 30-Hour Construction Outreach Study Guide! This new 190 page Study Guide will ensure you are ready to take the final exam to receive your OSHA DOL Card. The Study Guide will assist you throughout the online course and can also be used as a future reference manual.
Course Duration: Minimum 30 Hours
Learning Outcome: Upon completion, each student will be able to:
- State the purpose of theOSH Act and list the functions of OSHA
- List the OSHA inspection priorities and describe the inspectionprocess
- Describe the rights and responsibilities of employers and employees under the OSH Act
- The basic requirements for proper aisle and passageway maintenance
- Guidelines for identification andprotection of floor openings
- To understand the importance of effective Egress fire protectionprogram
- To know the safe means of Egress to provide fire protection in emergencies from new or oldbuildings or structures
- Outline the general requirements for general safety standards
- Establish the guidelines and requirements for special purpose equipment
Testing: All module quizzes require a score of 70 to proceed forward in the course. The final exam also requires a minimum score of 70 to receive a certificate of completion. The final exam may be taken three times if necessary.
Time to completion: Once you enroll in the OSHA 30 Hour General Industry Outreach Training course you will have 6 months to successfully complete the course. If you do not complete the course in 6 months you will not receive a certificate for course completion.
Need a Certificate Now? A temporary printable certificate will be made available immediately upon successful completion of course. Passing participants will also receive an OSHA 30-Hour General Industry Outreach DOL course completion card within 4-6 weeks. Laminated cards now available!
In order to receive your OSHA Outreach DOL course completion card you must complete the survey at the end of the course.
The OSHA Thirty Hour General Industry Outreach Training course has been reviewed and accepted by OSHA for online distribution.
Prerequisite: The OSHA 30 Hour General Industry Outreach Training course does not have any pre-requisites; however, the OSHA 30Hour General Industry Outreach training course or an equivalent of 30 hours of prior safety and health training plus 5 years of general industry safety and health experience is a prerequisite for the OSHA 501 Trainer course.
OSHA – 30 Hour Construction Industry Training Study Guide
OSHA – 30 Hour Construction Industry Outreach Training Study Guide
OSHA 30 Hour Construction Industry Training With Study Guide
OSHA 30 Hr Construction Industry Outreach Training with Study guide
 |
The Regular price for this course is 339.00, however if you use the discount code “OSHA upon checkout the price is only $271.20
|
 |
|
The OSHA 30 Hour Construction Industry Outreach Training course is a comprehensive safety program designed for anyoneinvolved in the construction industry. Specifically devised for safety directors, foremen, and field supervisors; the program provides complete information on OSHA compliance issues. OSHA recommends Outreach Training Programs as an orientation to occupational safety and health for workers covered by OSHA 29 CFR 1926. Construction workers must receive additional training, when required by OSHA standards, on specific hazards of the job. |
 |
|
NEW! OSHA 30-Hour Construction Outreach Study Guide! This new 190 page Study Guide will ensure you are ready to take the final exam to receive your OSHA DOL Card. The Study Guide will assist you throughout the online course and can also be used as a future reference manual
Learning Outcomes:
- Locate OSHA Standards references applicable to specific hazardousconditions and practices (Introduction to OSHA Standards)
- Recognize the aspects of 1926 Subpart C (GeneralSafety and Health Provisions)
- Implement preventative measures for accidents in their workplace (Subpart D-Occupational health and Environmental Controls)
- Describe types of personal protective equipment (PPE),and the requirements for use in OSHA standards (Subpart E- Personal Protective Equipment)
- Understand therequirements for fire protection in the workplace (Subpart F- Fire Protection and Prevention)
- Identify typesof rigging equipment used to protect employees (Subpart H- Rigging; Subpart N- Cranes and Rigging)
- Identifythe critical health and safety hazards of welding and cutting in the construction industry (Subpart J- Welding and Cutting)
- Identify common electrical hazards and related OSHA standards (Subpart K- Electrical Standards)
- Understand the importance of scaffolding for workers in elevated workplaces (Subpart L- Scaffolding)
- Implement measures for protecting workers and equipment from dangerous falls (Subpart M- Fall Protection)
- Recognize the hazards associated with working in or around excavation sites (Subpart P- Excavations)
- Understand the safety requirements necessary to protect workers around concrete and masonry jobs (Subpart Q- Concreteand Masonry)
- Identify the precautions and hazards to protect workers using explosives or blasting agents(Subpart T- Demolition)
- Protect workers who perform jobs on or around stairways or ladders at worksites(Subpart X – Stairways and Ladders)
- List and describe the hazards and prevalence of confinedspaces
Course Pre-Requisite: None
Testing: All module quizzes require a score of 70 to proceed forward in the course. The final exam also requires a minimum score of 70 to receive a certificate of completion. The final exam may be taken three times if necessary.
Time to completion:
Once you enroll in the OSHA 30 Hour Construction Outreach Training course you will have 6 months to successfully complete the course. If you do not complete the course in 6 months you will not receive a certificate for course completion.
Need a Certificate Now? A temporary printable certificate will be made available immediately upon successful completion of course. Passing participants will also receive an OSHA 30-Hour Construction Outreach DOL course completion card within 4-6 weeks. Laminated cards now available! In order to receive your OSHA Outreach DOL course completion card you must complete the survey at the end of the course. The OSHA Thirty Hour Construction Outreach Training course has been reviewed and accepted by OSHA for online distribution.
OSHA 10 Hour Construction Training Study Guide
OSHA 10 Hour Construction Industry Outreach Training Study Guide
OSHA 10 Hour Construction Industry Training Program w/ Study Guide
OSHA 10 Hour Construction Industry Outreach Training Program with Study Guide
 |
This package is already discounted. There is no discount code available |  |
This course covers ten (10) hours of courses, required by the Occupational Health and Safety Act (OSHA), that apply toward 10-hour Construction Industry course completion card. This module is comprised of 12 sections, covering topics pertaining to regulations covered by Standard 29 CFR 1926. The successful completion of this course will help to meet the Construction Industry standards established byOSHA. |
 |
|
NEW! OSHA 10-Hour Construction Outreach Study Guide! This new 75 page Study Guide will ensure you are ready to take the final exam to receive your OSHA DOL Card. The Study Guide will assist you throughout the online course and can also be used as a future reference manual.
Time to completion: Once you enroll in the OSHA 10 Hour Construction Outreach Training course you will have 6 months to successfully complete the course. If you do not complete the course in 6 months you will not receive a certificate for course completion.
Need a Certificate Now?
A temporary printable certificate will be made available immediately upon successful completion of course. Passing participants will also receive an OSHA 10-Hour Construction Outreach DOL course completion card within 4-6 weeks.
Laminated cards now available!
In order to receive your OSHA Outreach DOL course completion card you must complete the survey at the end of the course. The OSHA Ten Hour Construction Outreach Training course has been reviewed and accepted by OSHA for online distribution.
OSHA 10 Hour General Industry Training Study Guide
OSHA 10 Hour General Industry Outreach Training Study Guide
OSHA 10 Hour General Industry Training Program w/ Study Guide
OSHA – 10 Hour General Industry Outreach Training Program w/ Study Guide
|
This Price has already been discounted. There is no discount code | |
|
This course is ideal for supervisors with safety and health responsibilities and for employee safety and health awareness. Students will be introduced to OSHA policies, procedures and standards as well as general industry safety and health principles covered in OSHA Act Part 1910. Special emphasis will be placed on areas most hazardous using OSHA standards as a guide. Upon successful completion of the course, participants will receive an OSHA 10-Hour General Industry Outreach DOL course completion card within 4-6 weeks. |
|
|
Learning Outcomes:
- State the purpose of the OSH Act and list the functions of OSHA
- List the OSHA inspection priorities and describe the inspection process
- Describe the rights and responsibilities of employers and employees under the OSH Act
- The basic requirements for proper aisle and passageway maintenance
- Guidelines for identification and protection of floor openings
- To understand the importance of effective Egress fire protection program
- To know the safe means of Egress to provide fire protection in emergencies from new or old buildings or structures
- Outline the general requirements for general safety standards
- Establish the guidelines and requirements for special purpose equipment
NEW! OSHA 10- Hour General Industry Outreach Study Guide! This new 75 page Study Guide will ensure you are ready to take the final exam to receive your OSHA DOL Card. The Study Guide will assist you throughout the online course and can also be used as a future reference manual.
Course Pre-Requisite: None
Testing: All module quizzes require a score of 70 to proceed forward in the course. The final exam also requires a minimum score of 70 to receive a certificate of completion. The final exam may be taken three times if necessary.
Time to completion: Once you enroll in the OSHA 10 Hour General Industry Outreach Training course you will have 6 months to successfully complete the course. If you do not complete the course in 6 months you will not receive a certificate for course completion.
Need a Certificate Now? A temporary printable certificate will be made available immediately upon successful completion of course. Passing participants will also receive an OSHA 10-Hour General Industry Outreach DOL course completion card within 4-6 weeks. Laminated cards now available! In order to receive your OSHA Outreach DOL course completion card you must complete the survey at the end of the course. The OSHA Ten Hour General Industry Outreach Training course has been reviewed and accepted by OSHA for online distribution.